Water Heater Shutdown: How to Handle It Properly
Water Heater Shutdown: How to Handle It Properly
Blog Article
They are making a few good points relating to What Would Cause My Electric Water Heater to Stop Working? as a whole in the content following next.
Lots of contemporary residences use an electric water heater for their heating unit, due to its ease and convenience of use. However, much like any other electric devices, troubles might arise with its use, suddenly. It can be really aggravating to get up to a chilly shower as opposed to a warm one or having your bath with water that isn't hot sufficient or even too hot. Whatever the case might be, water heater issues can be rather nerve-racking. Fortunately, we have actually made a list of possible remedies to your hot water heater issues. There are a variety of aspects that might trigger a number of these issues, maybe an issue with the power supply, the electric burner, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for safety and security. Whatever the problem is, getting it fixed should not present way too much of an issue if you follow these actions:
Call An Expert:
If after replacing all damaged components and resetting your temperature, the hot water heater still isn't functioning, you might need to get in touch with a professional plumber for an expert point of view. The issue with your heater could be that the cold and hot faucets have been switched over or it may be undersized for the quantity of warm water needed in your house. Whatever the case may be, a specialist plumber would certainly help solve the issue.
Examine Your Power Supply:
As standard as this might appear, it is very needed. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water instantly stops working is to verify that it isn't a power trouble. Examine if the fuse is blown out or the breaker stumbled. If the circuit breaker is the problem, merely transform it on and off again. Replace any type of damaged or damaged fuse. Test the appliance with power after these adjustments to see if it's currently functioning.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you might need to check the temperature setups on your top thermostat. Make certain the breaker is turned off prior to doing anything. Open the access panel and also press the red button for temperature reset over the thermostat. This ought to assist warm the water. Transform the circuit breaker back on and also check if the trouble has been solved.
Inspect the Heating Element in the Hot Water Heater:
If it's not a power trouble, then attempt taking a look at your burner if it is still working. Examine each of your heating elements to be sure the issue isn't with any one of them. If any of them is damaged, replace that component and then inspect whether the warm water is back on.
Conclusion
Hot water heater problems are not constantly major. Most of them are due to minor concerns like a blown fuse or damaged heating element. Replacing the defective components should suffice. However, if you are still not able to solve the problem, give a call to your nearby plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an enthusiastic reader on What Would Cause My Electric Water Heater to Stop Working?, I assumed sharing that excerpt was essential. For those who enjoyed our post if you please do not forget to pass it around. I appreciate reading our article about Hot Water Heater Repair.
Top plumbers, call! Report this page